---
title: "Configuring the Packaging Application"
canonical: https://customerscanvas.com/docs/cc6/origami-settings.htm
archived: true
applies_to:
  - product: "Customer's Canvas On-Premises"
  - product: "Design Editor"
    versions: ["6.15.0", "6.x (may differ)"]
---

**You’re viewing outdated documentation.** [View the latest Customer’s Canvas On-Premises documentation](https://customerscanvas.com/docs/on-premises/).

# Configuring the Packaging Application

**Applies to:** Customer's Canvas On-Premises; Design Editor 6.15.0, 6.x (may differ) · **Archived documentation**
 
You can configure the settings of the application in the `Web.config` file. This file is in the root folder of the web application. You can find die-cut models in the `~/App_Data/Models` folder.
 
## Settings of Die-Cut Models
  
Your application comes with pre-built models. You can find a set of models in `~/App_Data/Models`. To use another folder for models, specify one through the Origami.DieCutModelPath key in `Web.config`. The most essential section of each JSON file is the definition of model parameters and predefined sizes, which are returned by the [GetDieCutModel](https://customerscanvas.com/docs/cc6/origami-webapi.htm.md) and [GetDieCutModels](https://customerscanvas.com/docs/cc6/origami-webapi.htm.md) methods.
 
## Application Settings
  
The following snippet shows all available parameters of the Packaging application, which you can set up in `Web.config` with their default values.
 
```xml
<configuration>
    <appSettings>
        <add key="Origami.CustomersCanvasMockupPath" value="..\CustomersCanvas\ProductTemplates\mockups" />
        <add key="Origami.CorsOrigins" value="*" />
        <add key="GraphicsMillLicenseKey" value="" />
        <add key="Origami.DieCutModelPath" value="~/App_Data/Models" />
        <add key="Origami.DieCutGeneratorPath" value="~/App_Data/DieCutGenerator/Demo/DieCutGenerator.exe" />
        <add key="Origami.DieCutTemplate.Mockup.Cut.Width" value="8" />
        <add key="Origami.DieCutTemplate.Mockup.Cut.Color" value="RgbColor(255, 0, 0)" />
        <add key="Origami.DieCutTemplate.Mockup.Crease.Width" value="8" />
        <add key="Origami.DieCutTemplate.Mockup.Crease.Color" value="RgbColor(0, 0, 255)" />
        <add key="Origami.DieCutTemplate.Mockup.Bleed.Width" value="8" />
        <add key="Origami.DieCutTemplate.Mockup.Bleed.Color" value="RgbColor(0, 255, 0)" />
        <add key="Origami.DieCutTemplate.Mockup.Outside.Color" value="RgbColor(220, 220, 220, 200)" />
        <add key="Origami.DieCutTemplate.Print.Cut.Width" value="1" />
        <add key="Origami.DieCutTemplate.Print.Cut.Color" value="CmykColor(0, 0, 0, 255)" />
        <add key="Origami.DieCutTemplate.Print.Cut.Spot" value="CUT" />
        <add key="Origami.DieCutTemplate.Print.Crease.Width" value="1" />
        <add key="Origami.DieCutTemplate.Print.Crease.Color" value="CmykColor(0, 255, 0, 0)" />
        <add key="Origami.DieCutTemplate.Print.Crease.Spot" value="FOLD" />
        <add key="Origami.DieCutTemplate.Print.Bleed.Width" value="1" />
        <add key="Origami.DieCutTemplate.Print.Bleed.Color" value="CmykColor(38, 0, 191, 99)" />
        <add key="Origami.DieCutTemplate.Print.Bleed.Spot" value="BLEED" />
        <add key="Origami.DieCutGeneratorCleanupInputDir" value="true" />
        <add key="Origami.DieCutGeneratorCleanupOutputDir" value="true" />
        <add key="Origami.DieCutTemplatePath" value="~/App_Data/Templates" />
        <add key="Origami.Model3DPath" value="~/models" />
        <add key="Origami.Dpi" value="300" />
        <add key="Origami.Padding" value="5" />
        <add key="Origami.CustomersCanvasMockupSubDirName" value="origami" />
        <add key="Origami.ProjectPath" value="~/App_Data/Projects" />
        <add key="Origami.TempPath" value="~/App_Data/Temp" />
        <add key="Origami.CacheEnabled" value="true" />
        <add key="Origami.CachePath" value="~/App_Data/Cache" />
    </appSettings>
</configuration>
```
 
|  Name |  Description |  Possible values |
| --- | --- | --- |
   |  Basic settings |
 |  Origami.CustomersCanvasMockupPath |  A path to the folder with mockups in the Customer's Canvas installation. Usually, they are located in `\ProductTemplates\mockups`. The default value is `"..\CustomersCanvas\ProductTemplates\mockups"`. |  folder path |
 |  Origami.CorsOrigins |  A comma-separated list of domains with protocols from which the Web API calls are allowed. For example, `"https://customerscanvas.com,http://localhost:53469"`. The `"*"` default value allows access from any domain. |  string |
 |  GraphicsMillLicenseKey |  A license key. For example, `"80FF0-112E8-123B6-81238-94D4C-FE0123"`. |  string |
 |  Die-cut template generation settings |
 |  Origami.DieCutModelPath |  The location of parametric model settings (in a JSON format). The default value is `"~/App_Data/Models"`. |  folder path |
 |  Origami.DieCutGeneratorPath |  The path to the die-cut generator. The default value is `~/App_Data/DieCutGenerator/Demo/DieCutGenerator.exe`. |  string |
 |  Visualization in Customer's Canvas while editing products |
 |  Mockup cut lines |
 |  Origami.DieCutTemplate.Mockup.Cut.Width |  The width of cut lines in a mockup. The default value is `8`. |  number |
 |  Origami.DieCutTemplate.Mockup.Cut.Color |  The color of cut lines in a mockup. The default value is `"RgbColor(255, 0, 0)"`. |  string |
 |  Mockup crease lines |
 |  Origami.DieCutTemplate.Mockup.Crease.Width |  The width of crease lines in a mockup. The default value is `8`. |  number |
 |  Origami.DieCutTemplate.Mockup.Crease.Color |  The color of crease lines in a mockup. The default value is `"RgbColor(0, 0, 255)"`. |  string |
 |  Mockup bleed lines |
 |  Origami.DieCutTemplate.Mockup.Bleed.Width |  The width of bleed lines in a mockup. The default value is `8`. |  number |
 |  Origami.DieCutTemplate.Mockup.Bleed.Color |  The color of bleed lines in a mockup. The default value is `"RgbColor(0, 255, 0)"`. |  string |
 |  Mockup outside area |
 |  Origami.DieCutTemplate.Mockup.Outside.Color |  The color of a shaded outside area. The default value is `"RgbColor(220, 220, 220, 200)"`. |  string |
 |  Die-cut templates printed in the resulting PDF files |
 |  Die-cut template cut line |
 |  Origami.DieCutTemplate.Print.Cut.Width |  The width of cut lines in a PDF file. The default value is `1`. |  number |
 |  Origami.DieCutTemplate.Print.Cut.Color |  The color of cut lines in a PDF file. The default value is `"CmykColor(0, 0, 0, 255)"`. |  string |
 |  Origami.DieCutTemplate.Print.Cut.SpotColor |  The name of a spot color. The default value is `"CUT"`. |  string |
 |  Die-cut template crease line |
 |  Origami.DieCutTemplate.Print.Crease.Width |  The width of crease lines in a PDF file. The default value is `1`. |  number |
 |  Origami.DieCutTemplate.Print.Crease.Color |  The color of crease lines in a PDF file. The default value is `"CmykColor(0, 255, 0, 0)"`. |  string |
 |  Origami.DieCutTemplate.Print.Crease.SpotColor |  The name of a spot color. The default value is `"FOLD"`. |  string |
 |  Die-cut template bleed line |
 |  Origami.DieCutTemplate.Print.Bleed.Width |  The width of bleed lines in a PDF file. The default value is `1`. |  number |
 |  Origami.DieCutTemplate.Print.Bleed.Color |  The color of bleed lines in a PDF file. The default value is `"CmykColor(38, 0, 191, 99)"`. |  string |
 |  Origami.DieCutTemplate.Print.Bleed.SpotColor |  The name of a spot color. The default value is `"BLEED"`. |  string |
 |  Miscellaneous settings |
 |  Origami.DieCutGeneratorCleanupInputDir |  Specifies whether input files of the die-cut generator will be cleaned up. Files are placed in the Origami.DieCutGeneratorPath location and can be used for debugging purposes. The default value is `true`. |  `true`, `false` |
 |  Origami.DieCutGeneratorCleanupOutputDir |  Specifies whether output files of the die-cut generator will be cleaned up. Files are placed in the Origami.DieCutGeneratorPath location and can be used for debugging purposes. The default value is `true`. |  `true`, `false` |
 |  Origami.DieCutTemplatePath |  The location of generated die-cut templates in the PDF format. The default value is `"~/App_Data/Templates"`. |  folder path |
 |  Origami.Model3DPath |  The location of generated 3D models in the COLLADA format. This folder should be browsable. The default value is `"~/models"`. |  folder path |
 |  Origami.Dpi |  The DPI of die-cut templates. The default value is `300`. |  number |
 |  Origami.Padding |  The padding of die-cut templates. The default value is `5`. |  number |
 |  Origami.CustomersCanvasMockupSubDirName |  The name of subfolder created in the Origami.CustomersCanvasMockupPath location to store mockups. The default value is `"origami"`. |  string |
 |  Origami.ProjectPath |  The location for saving projects. The default value is `"~/App_Data/Projects"`. |  folder path |
 |  Origami.TempPath |  The location for saving temporary files. The default value is `"~/App_Data/Temp"`. |  folder path |
 |  Origami.CacheEnabled |  Enables caching of die-cut templates and 3D models. The default value is `true`. |  `true`, `false` |
 |  Origami.CachePath |  The location for previously generated die-cut templates and 3D models. The default value is `"~/App_Data/Cache"`. |  folder path |
 
## See Also
  
### Manual
 
- [Getting Started with the Packaging Application](https://customerscanvas.com/docs/cc6/origami-sample.htm.md)