Editor config reference

  • 45 minutes to read

This topic describes all the parameters that allows you to configure the Design Editor. These parameters are represented in the same way as they defined in the ~/Configuration/clientConfig.json file. For an alternative description, you can refer to the JS API reference.

Note

The default measurement units in the Design Editor are points. If a parameter accepts other units, then the unit name is specified in the parameter name, for example, lineWidthPx accepts pixels. The unit shortcuts are px for pixels, pct for percents, etc.

Parameter names are case sensitive.

You can click a parameter name to get its description.

{
    "spellCheckEnabled": true,
    "initialMode": "Simple",
    "fontList": { "appFonts": ["*"] },
    "fontListMode": "Advanced",
    "assetSources": { ... },
    "defaultLanguage": "en",
    "loadUserInfoButtonEnabled": false,
    "autoLoadUserInfo": true,
    "createGroupsAs": "smart",
    "autoImageUploadModeEnabled": false,
    "revertProductConfirmationEnabled": true,
    "imageEditorEnabled": true,
    "deleteItemConfirmationEnabled": true,
    "restoreProductOnReloadEnabled": false,
    "alignToSafetyLineName": "bleed",
    "variableItemsMaskSymbol": "%",
    "canvasOnlyMode": false,
    "defaultProductTheme": "",
    "productThemes": null,
    "themeConfiguration": null,
    "canvas": {
        "color": "#fff",
        "shadowEnabled": false,
        "paddingPct": 5,
        "maskedPlaceholderUnderscoreEnabled": true,
        "suppressOutOfRegionManipulation": true,
        "violationWarningButtonsEnabled": true,
        "qualityChangeContainersEnabled": true,
        "floatingItemToolbarEnabled": true,
        "autoItemSelectionEnabled": true,
        "autoPlaceholderEditModeEnabled": false,
        "gridVisible": false,
        "safetyLinesVisible": true,
        "snapLinesVisible": true,
        "canvasItemHoverEnabled": false,
        "historySize": 10,
        "pinchZoomEnabled": true,
        "textEditor": "default",
        "curvedTextBaselineDrawStates": ["edit", "select", "hover", "move", "rotate", "resize"],
        "rotatedTextInPlaceEditEnabled": true,
        "inactiveContainerTransparencyEnabled": true,
        "inactiveContainerTransparencyLevel": 0.8,
        "scrollbarEnabled": false,
        "zoom": {
            "min": 0.01,
            "max": 16,
            "step": 0.25
        },
        "rulers": {
            "enabled": true,
            "unit": "inch",
            "customUnitScale": "1",
            "origin": "{ "X": 0, "Y": 0 }"
        },
        "rotation": {
            "type": "Rotate90"
        },
        "snapLines": {
            "items": {
                "enabled": true,
                "color": "rgb(255,0,255)",
                "tolerance": 5,
                "priority": 0,
                "includeLocked": false
            }
        },
        "printZone": {
            "bleed": {
                "color": "rgba(255,0,0,1)",
                "altColor": "rgba(255,0,0,0)",
                "step": 5,
                "width": 1
            }
        },
        "handlers": {
            "placeholderEditingViewMode": "overlay",
            "imageMinDpi": "",
            "resizeLimits": {
                "common": { "width": null, "height": null}
            }
        },
        "listSettings": {
            "maxLevel": 3,
            "firstLineIndent": -20,
            "listIndent": 30,
            "levelIndent": 40,
            "tabOffset": 10,
            "numberingFormat": "number",
            "bulletChar": "•"
        }
    },
    "defaultItemsConfig": {
        "barcode": null,
        "ellipse": null,
        "image": null,
        "line": null,
        "placeholder": null,
        "rectangle": null,
        "richText": null,
        "shape": null,
        "text": null,
        "group": null,
        "clipart": null
    },
    "grid": {
        "enabled": true,
        "horizontalColor": "rgba(0, 255, 255, 0.2)",
        "verticalColor": "rgba(0, 255, 255, 0.2)",
        "stepX": 0.25,
        "stepY": 0.25,
        "lineWidthPx": 1
    },
    "rendering": {
        "hiResOutputDpi": 300,
        "hiResOutputFileFormat": "pdf",
        "hiResOutputColorSpace": "cmyk",
        "hiResOutputRgbColorProfileName": "",
        "hiResOutputCmykColorProfileName": "",
        "hiResOutputGrayscaleColorProfileName": "",
        "hiResOutputToSeparateFiles": false,
        "hiResOutputChannelContainersToSeparateFiles": false,
        "hiResOutputChannelContainersRenderEmptyPage": true,
        "hiResOutputBackgroundColor": "rgba(255,255,255,0)",
        "hiResOutputCompression": "jpeg",
        "hiResOutputJpegCompressionQuality": 90,
        "hiResOutputFlipMode": "none",
        "hiResOutputRotateMode": "none",
        "hiResOutputPdfMetadata": {
            "author": "",
            "creator": "",
            "keywords": "",
            "subject": "",
            "title": ""
        },
        "hiResOutputInStringPlaceholderHintsEnabled": false,
        "hiResOutputPdfFormat": "Default",
        "hiResOutputDestinationColorProfileName": "",
        "proofImageFileFormat": "jpeg",
        "proofImageRgbColorProfileName": "",
        "proofImageCropSafetyLine": "",
        "proofImageSafetyLinesEnabled": true,
        "proofImageSpineAndFoldingLinesEnabled": true,
        "proofImageFlipMode": "none",
        "proofImageMockupEnabled": true,
        "proofImageShowStubContent": false,
        "proofImageInterpolationMode": null,
        "proofImageRotateMode": "none",
        "proofImageInStringPlaceholderHintsEnabled": false
    },
    "violationWarningsSettings": {
        "regionViolationWarningEnabled": true,
        "safetyLineViolationWarningEnabled": true,
        "textCropViolationWarningEnabled": true,
        "shapeViolationsEnabled": true,
        "inPlaceNotSupportedWarningEnabled": false,
        "tolerance": 0.001,
        "safetyLines": {
            "enabled": true,
            "mode": "PartiallyInsideAny"
        },
        "qualityMeter": {
            "enabled": true,
            "qualityLevels": {
                "warning": 100,
                "bad": 50
            }
        }
    },
    "watermark": {
        "text": {
            "text": "watermark",
            "fontSettings": {
                "postScriptName": "Roboto-Regular",
                "size": 35,
                "fauxBold": false,
                "fauxItalic": false
            },
            "scale": 0.28,
            "opacity": 0.1
        },
        "image": {
            "name": "watermark.png",
            "repeat": false,
            "opacity": 0.4
        },
        "visibility": {
            "proof": false,
            "canvas": false
        }
    },
    "widgets": {
        "common": {
            "textFormattingEnabled": true,
            "fontSize": {
                "max": 1296,
                "min": 4,
                "step": 10
            },
            "tracking": {
                "max": 300,
                "min": -300,
                "step": 25
            },
            "leading": {
                "max": 1296,
                "min": 6,
                "step": 10
            }
        },
        "Toolbox": {
            "enabled": true,
            "buttons": [...],
            "containerToolboxes": [...],
            "insertOnTop": false
        },
        "AssetManager": {
            "defaultTabName": "",
            "enabledBackgroundChange": true,
            "maxUploadFileSize": null,
            "saveAllowedTabAfterInsert": false,
            "tabs": [...]
        },
        "ObjectInspector": {
            "bgItemEnabled": true,
            "dndEnabled": true,
            "violationWarningsEnabled": true,
            "variableItemsEnabled": false,
            "emptyListTextEnabled": true,
            "position": "Right",
            "aboveCanvasOnSmallScreenEnabled": true,
            "isHidden": false,
            "toggleEnabled": false,
            "inStringPlaceholderMode": "Multiple",
            "showItemName": false,
            "groupRenameEnabled": true,
            "groupsExpandedByDefault": false,
            "expandNestedGroups": false,
            "containerTabsEnabled": true
        },
        "ItemMenu": {
            "objectManipulationEnabled": true,
            "verticalAlignmentEnabled": true,
            "horizontalAlignmentEnabled": true,
            "changeZOrderEnabled": true,
            "renameEnabled": false,
            "groupItemsEnabled": true,
            "cloneItemsEnabled": true
        },
        "TopToolbar": {
            "alignButtonsEnabled": true,
            "displayAlignButtonsAsDropdown": true,
            "displayCaptionInButtons": false,
            "historyButtonsEnabled": true,
            "deleteButtonEnabled": false,
            "revertButtonEnabled": true,
            "layoutItemSettingsButtonEnabled": true,
            "displayZOrderButtonsAsDropdown": true,
            "cloneButtonEnabled": false,
            "groupButtonEnabled": true,
            "editTextButtonEnabled": false,
            "textVAlignmentButtonsEnabled": true,
            "textAlignmentButtonsEnabled": true,
            "textAllowChangeColumnCount": true,
            "textEmphasisButtonsEnabled": true,
            "textFontFamilyButtonEnabled": true,
            "textFontStyleButtonEnabled": true,
            "textFontSizeButtonEnabled": true,
            "textFontColorButtonEnabled": true,
            "textListButtonsEnabled": true,
            "textParagraphButtonEnabled": true,
            "textBendButtonEnabled": true,
            "textShadowButtonEnabled": true,
            "textStrokeButtonEnabled": true,
            "textStrokeColorButtonEnabled": true,
            "closeFontMenuOnClickEnabled": true,
            "opacitySliderEnabled": true,
            "textLeadingButtonEnabled": true,
            "textTrackingButtonEnabled": true,
            "multiRowModeEnabled": false,
            "borderColorButtonEnabled": true,
            "borderWidthButtonEnabled": true,
            "overlayColorButtonEnabled": false,
            "imageEditButtonEnabled": true,
            "imageSelectButtonEnabled": true,
            "placeholderEditButtonEnabled": true,
            "placeholderSelectButtonEnabled": true,
            "placeholderScaleButtonEnabled": true,
            "placeholderResetContentButtonEnabled": true,
            "changeBarcodeTypeButtonEnabled": true,
            "barcodeColorButtonEnabled": true,
            "barcodeCaptionButtonEnabled": false,
            "placeInSafetyAreaButtonEnabled": true,
            "fontPreviewSize": 17,
            "textStroke": { "max": 5, "min": 0.01, "step": 0.01 },
            "textShadow": {
                "angle": { "max": 360, "min": 0, "step": 15 },
                "distance": { "max": null, "min": 0, "step": 0.1 },
                "size": { "max": null, "min": 0, "step": 0.1 }
            },
            "fontSize": {
                "max": 100,
                "min": 4,
                "step": 0.5
            },
            "zOrder": {
                "zOrderLevelButtonsEnabled": true,
                "zOrderSendToButtonsEnabled": true
            }
        },
        "BottomToolbar": {
            "safetyLinesCheckboxEnabled": true,
            "gridCheckboxEnabled": true,
            "previewModeCheckboxEnabled": true,
            "snapLinesItemsCheckboxEnabled": true,
            "snapLinesPrintAreaCheckboxEnabled": true,
            "snapLinesSafetyLinesCheckboxEnabled": true,
            "zoomValueEnabled": true,
            "zoomButtonsEnabled": true,
            "rotateButtonEnabled": true,
            "fullWindowButtonEnabled": false,
            "fullScreenButtonEnabled": true,
            "surfaceSwitch": {
                "enabled": true,
                "showThumbnails": false,
                "showSurfaceNames": true,
                "scrollPageButtonsEnabled": true,
                "toggleSurfaceButtonsEnabled": false,
                "firstAndLastButtonsEnabled": true,
                "specificForSurfaceCount": { }
            }
        },
        "QrCodeDialog": {
            "defaultType": "QrUrl",
            "tabs": ["QrVCard", "QrUrl", "QrPhone", "QrData"]
        },
        "LinearBarcodeDialog": {
            "defaultType": "LinearEan8",
            "autoChecksum": false
        },
        "RichTextDialog": {
            "applyToAllTextMode": false,
            "bgColor": "white",
            "createMultiColumnText": false,
            "showHint": {"font": true, "style": true, ...},
            "showInput": {
                "size": true
            },
            "ckeditorConfig": {
                "specialChars": 
            },
            "textOutline": {
                "enabled": false,
                "hueThreshold": 74,
                "brightnessThreshold": 5,
                "color": "rgba(0, 0, 0, 0.2)"
            },
            "zoom": {
                "enabled": false,
                "minZoomPct": 10,
                "maxZoomPct": 500,
                "autoZoom": {
                    "enabled": false,
                    "minFontSizeThresholdPt": 12,
                    "maxFontSizeThresholdPt": 36
                }
            }
        },
        "FinishButton": {
            "mode": "Disabled"
        },
        "ImageEditorDialog": {
            "colorAdjustButtonEnabled": true,
            "cropButtonEnabled": true,
            "backgroundEraseButtonEnabled": true,
            "fullscreenOnTouchDevice": true,
            "imageContextMenuEnabled": true
        },
        "ColorPicker": {
            "showPaletteOnly": false,
            "sectionCollapseEnabled": false,
            "colorTypeDropdownEnabled": true,
            "eyeDropperEnabled": true,
            "defaultColorType": "cmyk",
            "availableColorTypes": ["cmyk", "rgb", "hex"],
            "paletteHintsEnabled": true,
            "cmykDecimalsEnabled": false,
            "colorSpace": "cmyk",
            "colorSpaceDropdownEnabled": true,
			"sections": [{
                "type": "PaletteSection",
                "translationKey": "Default",
                "viewType": "Block",
                "targets": ["All"],
                "palette": [["cmyk(0%,100%,100%,0%,100%)","cmyk(0%,0%,100%,0%,100%)",...],...]
            }]
        }
    }
}

Common Parameters

Name Description Possible values
spellCheckEnabled Enables spell checking for product text fields and for the Rich text dialog. The value in the config is true. boolean
initialMode The initial mode of the web-to-print editor, simple or advanced. If you want to disable the advanced mode, set this parameter to "SimpleOnly". The value in the config is "Simple". "Simple", "Advanced", "SimpleOnly"
fontList A list of fonts available for the user in the editor. All these fonts should be uploaded to the font folder on the server; by default it is ..\assets\fonts\. If not specified, the Design Editor enables all the fonts from this folder. The value in the config is { "appFonts": ["*"] }. array of font names
fontListMode A mode of the font list, simple or advanced. The simple mode allows users to select a font and set a font size. The advanced mode also provides the ability to change the font style. The value in the config is "Advanced". "Simple", "Advanced"
assetSources Configuration of asset sources available in the Asset Manager. By default, only the private user gallery is defined. For config examples, you can refer to the Image manager topic. object
defaultLanguage The default interface language. The value in the config is "en". string
loadUserInfoButtonEnabled Displays the Load my info button. The value in the config is false. boolean
autoLoadUserInfo If true, the product is automatically populated with predefined data when it is loaded into the editor; the Load my info button is not displayed in this case. The value in the config is true. boolean
createGroupsAs Enables either the "smart" or "base" type for new groups of design elements. So-called smart groups support the auto layout. Your users can change the group type and its properties by using the Smart group button. The value in the config is "smart". "smart", "base"
autoImageUploadModeEnabled If true, opens a dialog box for selecting a private image to insert it into the placeholder. If false, the Asset Manager opens for selection. The value in the config is false. boolean
revertProductConfirmationEnabled Enables the confirmation dialog when reverting a product to its initial state. The value in the config is true. boolean
imageEditorEnabled Enables the Image Editor. The value in the config is true. boolean
deleteItemConfirmationEnabled Enables the confirmation dialog when deleting an item from a product. The value in the config is true. boolean
restoreProductOnReloadEnabled Enables restoring a product state when the design page is reloaded in the browser. If false, the product is reverted on reloading. The value in the config is false. boolean
alignToSafetyLineName The name of a safety line to which an item will be aligned. If there is no safety line with a name, then the item will be aligned to the first safety line in the safety lines array. The value in the config is "bleed". string
variableItemsMaskSymbol A symbol marking design elements as variable items. By default, it is "%". string
canvasOnlyMode Hides all interface elements and displays only the canvas in the editor. The value in the config is false. boolean
defaultProductTheme The name of the default color theme. For an example, you can refer to the Changing product theme topic. string
productThemes The color sets containing the color name - color value pairs. You can define as many themes as you need. For an example, you can refer to the Changing product theme topic. object
themeConfiguration Properties that redefine the appearance of the UI theme. In the current implementation, you can change the primary theme color and set a new image for the standard preloader. For an example, you can refer to the IThemeConfiguration topic. object

Canvas

Object: canvas

Name Description Possible values
color The canvas color. This color is visible if a transparent object is placed on the canvas. The value in the config is "#fff". color in css-compatible format
shadowEnabled Enables the canvas shadow. The value in the config is false. boolean
paddingPct Padding between the canvas and the canvas viewer, in percent. The value in the config is 5. integer
maskedPlaceholderUnderscoreEnabled Enables displaying underscores in blank masked text layers. If it is set to false and the user has partially filled the text placeholder in, then the rest blank symbols are displayed as spaces. If true, the blank portion of the text layer displays underscores. The value in the config is true. boolean
suppressOutOfRegionManipulation Disallows the user to drag elements out of the region on the canvas. If true, your users cannot manipulate items out of regions. The value in the config is true. boolean
violationWarningButtonsEnabled Enables preflight warnings on the canvas. If true, notifying icons appear on low-resolution images, safety line violation, region violation, and text clipping. The value in the config is true. boolean
qualityChangeContainersEnabled Enables the DPI bar when resizing images. This bar displays the actual DPI of images and the resolution specified in the hiResOutputDpi property. The value in the config is true. boolean
floatingItemToolbarEnabled Enables the Floating Item Toolbar with the Select Image, Edit and Delete buttons right on the canvas. The value in the config is true. boolean
autoItemSelectionEnabled Allows you to automatically select the first design element in the simple and advanced editing modes. If an element is selected, you can switch between design elements on the canvas by using Tab and Shift+Tab. The value in the config is true. boolean
autoPlaceholderEditModeEnabled Allows your users to work with the content of image placeholders by clicking a placeholder in either simple or advanced edit mode. If true, the Handle does not appear on image placeholders. The value in the config is false. boolean
gridVisible Displays the grid when the canvas opens. The value in the config is false. boolean
safetyLinesVisible Displays safety lines when the canvas opens. The value in the config is true. boolean
snapLinesVisible Displays snap lines when the canvas opens. The value in the config is true. boolean
canvasItemHoverEnabled Enables text labels for editable design elements. The value in the config is false. boolean
historySize The number of actions in the Design Editor that can be reverted by using the Undo button. The value in the config is 10. To avoid overusing client resources, it is recommended to specify a value less than 100. number
pinchZoomEnabled Allows users to zoom the canvas using the pinch gesture on mobile devices. The value in the config is true. boolean
textEditor Specifies the text editor mode when the WYSIWYG editor is active. The "default" mode enables an editor depending on the desktop or mobile platform (TextWhizz or HTML); "html" enables an HTML-based editor, which allows you to use the Input Method Editor; "none" enables the Classic editor with popup-boxes and the Rich text editor. "default", "html", "none"
curvedTextBaselineDrawStates Specifies an array of states in which the path of curved text elements will be displayed. The value in the config is ["edit", "select", "hover", "move", "rotate", "resize"]. For more details, refer to the Curved text topic. array of "idle", "edit", "select", "hover", "move", "resize", "rotate"
rotatedTextInPlaceEditEnabled If not defined or true, text in rotated and arched text elements is edited on the canvas. If false, enables editing the rotated and arched text elements in popup boxes. In the latter case, list formatting isn't available. The default value is true. boolean
inactiveContainerTransparencyEnabled If not defined or true, displays the content of spot containers transparent. The default value is true. For more details, refer to the Post Press Finishing topic. boolean
inactiveContainerTransparencyLevel Defines how transparent inactive containers should be. Its value is in the range [0, 1]. If 0, the content of inactive containers becomes completely opaque. If 1, it becomes 100% transparent. The value in the config is 0.8. For more details, refer to the Post Press Finishing topic. number
scrollbarEnabled Enables scrollbars when the design does not fit the canvas at the current zoom level. The default value is false. boolean

Canvas Zoom

Object: canvas.zoom

Name Description Possible values
min The minimum zoom of the canvas. The value in the config is 0.01. number
max The maximum zoom of the canvas. The value in the config is 16. number
step The step of increasing or decreasing the zoom level of the canvas. The value in the config is 0.25. number

Rulers

Object: canvas.rulers

Name Description Possible values
enabled Displays the canvas rulers. The value in the config is true. boolean
unit The measurement unit of the rulers. The value in the config is "inch". "inch", "mm", "cm", "point", "custom"
customUnitScale The ratio of the custom unit to points. This parameter is applied only if the unit parameter described above is set to "custom". The value in the config is 1. number
origin The point of origin relative to the upper-left corner of the design. The coordinates are measured in the units specified by the unit parameter. The value in the config is { "X": 0, "Y": 0 }. object

Canvas Rotation

Object: canvas.rotation

Name Description Possible values
type The angle to which the canvas is rotated when clicking the Rotate button in the Bottom Toolbar. The value in the config is "Rotate90". "Rotate90", "Rotate180", "Rotate270"

Snap Lines

Object: canvas.snapLines

Name Description Possible values
The snap line type
objects: items, printArea, safetyLines, region, grid
enabled Displays snap lines of this type. The value in the config is true. boolean
color The color of snap lines of this type. The value in the config is "rgb(255,0,255)". string
tolerance The distance between an object and a snap line where the object clings to the line, in pixels. The value in the config is 5. number
priority The priority of these snap lines. In the case of overlapping tolerance zones, a snap line with the highest priority is displayed on the canvas. The higher this value, the higher the priority. The value in the config is 0. number
includeLocked When you configure snap lines so that they align to items, you can specify whether to align the lines to locked items or not. The value in the config is false. boolean

Bleed and Trim Lines

Object: canvas.printZone

Name Description Possible values
Marking type
objects: bleed, trim, or region
color The main color of lines. The value in the config is "rgb(255,0,0)". color in css-compatible format
altColor The alternative color. The value in the config is "rgba(255,0,0,0)". color in css-compatible format
step The step of dashed lines, in pixels. The value in the config is 5. number
width The width of dashed lines, in pixels. The value in the config is 1. number
visible If true, displays lines denoting the bleed zone, trim lines, or region, correspondingly. The value in the config is true for bleed and trim and false for region. boolean

Item processing rules

Object: canvas.handlers

Name Description Possible values
placeholderEditingViewMode Defines how the product will appear on the canvas when editing image placeholders. If "normal", the content that is outside its image placeholder appears transparent when the placeholder is in the edit mode. The "overlay" mode moves the placeholder content to the highest z-order and fades out the area outside this content when entering the edit mode. The value in the config is "overlay". "overlay", "normal"
imageMinDpi The minimum allowable DPI value that can be achieved when resizing images. By default, this limit is not set. number
Limit on the minimum item size
object: canvas.handlers.resizeLimits
common Defines the smallest size, in points, to which items on the canvas can be downsized. You can limit either width, height, or both: {"width":100, "height":50}. The "common" size limit is applicable to all items. In the same way, you can define the limitation separately to "image", "shape", "barcode", "text", "archedText", "rectangle", "ellipse", and "placeholder". Note that these limits only apply to user manipulations on the canvas and do not affect the use of APIs. By default, this limit is not set. object

Text Lists

Object: canvas.listSettings

Name Description Possible values
maxLevel The maximum number of levels in multilevel lists. The value in the config is 3. number
firstLineIndent The distance between the bullet and text in the first line of a list item, in points. The value in the config is -20. number
listIndent The distance between the left edge of the text element and the leftmost line of list items in this text element, in points. The value in the config is 30. number
levelIndent The offset of each next level of the list relative to the previous level, in points. The value in the config is 40. number
tabOffset The offset that will appear before text on the first line if this text may overlap the bullet, in points. If this value is not enough to create an indent, it will be added again. The value in the config is 10. number
numberingFormat The numbered list marker format. If "none", then list items will represent paragraphs without numbers. This marker format will be used when creating lists through the Top toolbar. The value in the config is "number". "none", "number", "lowerLetter", "upperLetter", "lowerRoman", "upperRoman"
bulletChar The bulleted list marker that will be used when creating lists through the Top toolbar. The value in the config is "•". symbol

Default Item Parameters

Object: defaultItemsConfig

Name Description Possible values
barcode Default parameters of barcodes, which users add to the canvas. For an example, refer to the IBarcodeItemData topic. object
ellipse Default parameters of ellipses, which users add to the canvas. For an example, refer to the IEllipseItemData topic. object
image Default parameters of images, which users add to the canvas. For an example, refer to the IImageItemData topic. object
line Default parameters of lines, which users add to the canvas. For an example, refer to the ILineItemData topic. object
placeholder Default parameters of placeholders, which users add to the canvas. For an example, refer to the IPlaceholderItemData topic. object
rectangle Default parameters of rectangles, which users add to the canvas. For an example, refer to the IRectangleItemData topic. object
richText Default parameters of rich formatted texts, which users add to the canvas. For an example, refer to the IBoundedTextItemData topic. object
shape Default parameters of shapes, which users add to the canvas. For an example, refer to the IShapeItemData topic. object
text Default parameters of texts, which users add to the canvas. For an example, refer to the ITextItemData topic. object
group Default parameters of SVG, PDF, and PSD assets loaded to the canvas in the group mode. For an example, refer to the IGroupItemData topic. object
clipart Default parameters of SVG, PDF, and PSD assets loaded to the canvas in the clipart mode. For an example, refer to the IClipartItemData topic. When this object is not defined, the group properties will be applied to clipart. object

Grid

Object: grid

Name Description Possible values
enabled Enables the grid. If the grid is enabled it can be toggled by the Grid button. The value in the config is true. boolean
horizontalColor The color of the horizontal grid lines. The value in the config is "rgba(0, 255, 255, 0.2)". color in css-compatible format
verticalColor The color of the vertical grid lines. The value in the config is "rgba(0, 255, 255, 0.2)". color in css-compatible format
stepX The distance between vertical grid lines, in the ruler units. The value in the config is 0.25 in. integer
stepY The distance between horizontal grid lines, in the ruler units. The value in the config is 0.25 in. integer
lineWidthPx The width of grid lines in pixels. The value in the config is 1. integer

Rendering

Object: rendering

Name Description Possible values
hiResOutputDpi Hi-res output resolution in dots per inch (DPI). The value in the config is 300. integer
hiResOutputFileFormat The type of the hi-res output. The value in the config is "pdf". "pdf", "jpeg", "png", "tiff"
hiResOutputColorSpace The color space of the hi-res output. The value in the config is "cmyk". "rgb", "cmyk", "grayscale"
hiResOutputRgbColorProfileName The name of an RGB color profile for hi-res outputs. By default, the editor uses the sRGB IEC61966-2.1 profile to render hi-res outputs in RGB. string
hiResOutputCmykColorProfileName The name of a CMYK color profile for hi-res outputs. By default, the editor uses the SWOP (Coated) 20%, GCR, Medium profile to render hi-res outputs in CMYK. string
hiResOutputGrayscaleColorProfileName The name of a color profile for grayscale outputs. By default, the editor uses the Dot Gain 30% profile to render hi-res outputs in grayscale. string
hiResOutputToSeparateFiles If true, the hi-res output for each page of a multipage product is put in a separate file. The value in the config is false. boolean
hiResOutputChannelContainersToSeparateFiles Renders spot colors and textures to separate PDF files. The value in the config is false. boolean
hiResOutputChannelContainersRenderEmptyPage Adds empty pages to PDF files when the corresponding pages of the base design have neither spot colors nor textures. The value in the config is true. boolean
hiResOutputBackgroundColor The background color for the hi-res output. The value in the config is "rgba(255,255,255,0)". color in css-compatible format
hiResOutputCompression The type of hi-res output compression. "jpeg" and "zip" are supported for PDF files only, whereas "lzw" is supported for TIFF files. The value in the config is "jpeg". "jpeg", "zip", "none", "lzw"
hiResOutputJpegCompressionQuality JPEG compression quality in percent. This parameter makes sense only for the JPEG and PDF formats. For PDF outputs, set hiResOutputCompression to "jpeg". The value in the config is 90. integer from 0 to 100.
hiResOutputFlipMode Flips hi-res outputs. The value in the config is "none". "none", "vertical", "horizontal", "both"
hiResOutputRotateMode Rotates hi-res outputs to the specified angle clockwise. By default, the Design Editor does not rotate the original design, and this value is "none". "none", "rotate90", "rotate180", "rotate270"
hiResOutputInStringPlaceholderHintsEnabled Displays hints for unfilled in-string placeholders in hi-res outputs. The value in the config is false. boolean
hiResOutputPdfFormat If "X4", enables DeviceCMYK and does not embed any color profile into the resulting PDF file in the PDF/X-4 standard. By default, print files are generated in PDF 1.4. "Default", "X4"
hiResOutputDestinationColorProfileName Defines the color profile name to preview CMYK colors on the canvas. To enable this preview mode, the AutoTargetDevicePreviewMode param must be `True` or not included in AppSettings.config. By default, the preview mode is enabled and uses the default destination profile. string
proofImageFileFormat The type of proof image files. The value in the config is "jpeg". "jpeg", "png"
proofImageRgbColorProfileName The name of an RGB color profile for proof images. By default, the editor uses the sRGB IEC61966-2.1 profile to render proof images. string
proofImageCropSafetyLine The name of a safety line, which proof images are cropped to. If there is no safety line with the given name, proof images are not cropped. By default, proof images appear uncropped. string
proofImageSafetyLinesEnabled Displays safety lines on proof images. The value in the config is true. boolean
proofImageSpineAndFoldingLinesEnabled Displays spines and folding lines on proof images. The value in the config is true. boolean
proofImageFlipMode The flip mode for proof images. The value in the config is "none". "none", "vertical", "horizontal", "both"
proofImageMockupEnabled Displays mockups on proof images. If it is true, then the editor renders a mockup with a print area. If it is false, then the editor renders only print areas to proof images. The value in the config is true. boolean
proofImageShowStubContent Enables the stub images and text hints in unfilled placeholders. The value in the config is false. boolean
proofImageInterpolationMode An interpolation algorithm used for resizing proof images. You can find the list of supported algorithms in the specification of the Aurigma Graphics Mill library. For example, you can use "Lanczos", "NearestNeighbour", and others. By default, no interpolation algorithms are applied to resize proof images. string
proofImageRotateMode Rotates proof images to the specified angle clockwise. If "auto", rotates proof images at the same angle that the canvas is rotated. By default, the Design Editor does not rotate the original design, and this value is "none". "none", "auto", "rotate90", "rotate180", "rotate270"
proofImageInStringPlaceholderHintsEnabled Displays hints for unfilled in-string placeholders on proof images. The value in the config is false. boolean

PDF metadata

Object: rendering.hiResOutputPdfMetadata

Name Description Possible values
author The author of the PDF document. string
creator The creator of the PDF document. string
keywords Keywords of the PDF document. string
subject The subject of the PDF document. string
title The title of the PDF document. string

Preflight Warnings

Object: violationWarningsSettings

Name Description Possible values
regionViolationWarningEnabled Enables a warning displayed if an item goes out of a region. The value in the config is true. boolean
safetyLineViolationWarningEnabled Outdated. Instead, define the safetyLines object with the "InsideAll" mode. Enables a warning displayed if an item crosses a safety line. The value in the config is true. boolean
textCropViolationWarningEnabled Enables a warning displayed if the text is too long for the bounding rectangle, and some strings are clipped. The value in the config is true. boolean
shapeViolationsEnabled Enables a warning displayed if the Asset Manager can import PDF and SVG vector graphics only with losses. The value in the config is true. boolean
tolerance The distance, in points, within which no warnings about violations of safety lines or the bleed zone will be displayed. The value in the config is 0.001. number
inPlaceNotSupportedWarningEnabled Enables warnings displayed when text elements have properties that are not supported in the WYSIWYG text engine and when the Classic text engine will render this text. The value in the config is false. boolean

Safety lines

Object: violationWarningsSettings.safetyLines

Name Description Possible values
enabled Enables the bleed zone validation. The value in the config is true. boolean
mode If InsideAll, a warning does not appear if the element is inside all safety lines. If PartiallyInsideAny, a warning does not appear if at least one safety zone contains the element. If InsideAny, a warning does not appear if at least one safety zone contains the element, and no safety lines intersect the element. The value in the config is "PartiallyInsideAny". "InsideAll", "PartiallyInsideAny", "InsideAny"

Quality meter

Object: violationWarningsSettings.qualityMeter

Name Description Possible values
enabled Enables the quality meter and low DPI warnings. The value in the config is true. boolean
Image quality levels
object: violationWarningsSettings.qualityMeter.qualityLevels
warning The warning image quality level, comparing to the hi-res output DPI, in percent. This value should be greater than or equal to the bad value. The default is 100. number
bad The bad image quality level, comparing to the hi-res output DPI, in percent. This value should be less than or equal to the warning value. The default is 50. number

Watermark

Object: watermark

Text Parameters

Object: watermark.text

Name Description Possible values
text Watermark text to display. The default text is "watermark". string
scale The font size scale. This parameter specifies how much space the watermark text will occupy relative to the product size. The value in the config is 0.28. number
opacity The opacity of the watermark text. The value in the config is 0.1. number
Font parameters
object: watermark.text.fontSettings
postScriptName The watermark font name. The value in the config is "Roboto-Regular". string
size The font size of the watermark text. The value in the config is 35. number
fauxBold Applies the faux bold effect to the watermark. The value in the config is false. boolean
fauxItalic Applies the faux italic effect to the watermark. The value in the config is false. boolean

Image Parameters

Object: watermark.image

Name Description Possible values
name The filename of the watermark image. This file should be uploaded to the ..\assets\helpers\ folder on the server. By default, the Design Editor displays watermark.png. string
repeat If false, displays the watermark image in the center of the canvas or proof images. If true, repeats the image. The value in the config is false. boolean
opacity The opacity of the watermark image. The value in the config is 0.4. number

Watermark Visibility

Object: watermark.visibility

Name Description Possible values
proof Displays the watermark on proof images. The value in the config is false. boolean
canvas Displays the watermark on the canvas. The value in the config is false. boolean

Widgets

Object: widgets

Common Text Parameters

Object: widgets.common

Name Description Possible values
textFormattingEnabled If true, the top toolbar displays the buttons for changing layer properties, and when the user double-clicks a text layer and enters the editing mode, it allows for changing the rich text format on the canvas or Rich Text editor. If false, the top toolbar displays buttons for both changing the layer properties and editing the text, and the user can edit text on the canvas and Object Inspector. The <TATF> marker overrides this behavior for a single text layer, however, <TATF_null> will use the value of this parameter. The value in the config is true. boolean
Font size parameters
object: widgets.common.fontSize
max The maximum font size. This value is used in the Rich Text dialog. Also, if you do not define font size box parameters for the Top Toolbar, then this value is applied to point text. number
min The minimum font size used in the Rich Text dialog. Also, if you do not define font size box parameters for the Top Toolbar, then this value is applied to point text. number
step The step to change the font size in the Rich Text dialog. number
Tracking parameters
object: widgets.common.tracking
max The maximum tracking value. The value in the config is 300. number
min The minimum tracking value. The value in the config is -300. number
step The step to change the tracking value. The value in the config is 25. number
Leading parameters
object: widgets.common.leading
max The maximum leading value. The value in the config is 1296. number
min The minimum leading value. The value in the config is 6. number
step The step to change the leading value. The value in the config is 10. number

Toolbox

Object: widgets.Toolbox

Name Description Possible values
enabled Displays the Toolbox. The value in the config is true. boolean
buttons Configures the Toolbox buttons. By default, the Design Editor enables the following buttons in the Toolbox: "Text", "RichText", "Image", "Line", "Rectangle", "Ellipse", "QrCode", "LinearBarcode", "DataMatrixBarcode". For config examples, you can refer to the Toolbox topic. This topic also describes how you can predefine properties of design elements. array
containerToolboxes Configures the Toolbox buttons for channel containers. For config examples, you can refer to the Post Press Finishing Layers topic. array
insertOnTop If `true`, each newly added image will appear on top of all the elements. If `false`, the new image will be considered the background for another image or shape on the top layer and will appear below. The value in the config is false. boolean

Asset Manager

Object: widgets.AssetManager

Name Description Possible values
defaultTabName The default tab is displayed when you open the Asset Manager; it should be one of the defined tabs. string
enabledBackgroundChange If true, allows you to open the Asset Manager to select an image for the background. In this case, when you click the background layer, both the Color and Image tabs will be available. If false, the Color picker will only be displayed to change the color. The value in the config is true. boolean
maxUploadFileSize The maximum size of files that can be uploaded through the Asset Manager, in bytes. This value must be 102400 (100 kB) or more. By default, this value is null, and the size of uploaded files is not limited. number
saveAllowedTabAfterInsert Allows you to restrict the image selection only to the asset tab from which an image was selected. If true, your users cannot open another tab. The value in the config is false. boolean
tabs Configures tabs available in the Asset Manager. Before configuring tabs, you must define asset sources for them. By default, the Design Editor enables only the My files tab. array

Object Inspector

Object: widgets.ObjectInspector

Name Description Possible values
bgItemEnabled Displays the background element in the Object Inspector. The value in the config is true. boolean
dndEnabled Enables drag-and-drop for elements in the Object Inspector. The value in the config is true. boolean
violationWarningsEnabled Enables preflight warnings in the Object Inspector. If true, notifying icons appear on low-resolution images, safety line violation, region violation, and text clipping. The value in the config is true. boolean
variableItemsEnabled Enables check boxes for text elements and images to select variable fields. If true, you can mark design elements as variable items at runtime and then personalize them in your e-commerce system. The value in the config is false. boolean
emptyListTextEnabled Enables text, displayed when a loaded template has no customizable layers. The value in the config is true. boolean
position Displays the Object Inspector from the right or left side of the canvas. The value in the config is "Right". "Left", "Right"
aboveCanvasOnSmallScreenEnabled If true, the Object Inspector appears above the canvas when you work on small-screen devices. Otherwise, it appears from the left side of the canvas. The value in the config is true. boolean
isHidden If it is true, then the editor hides the Object Inspector and expands the canvas to the available width. The value in the config is false. boolean
toggleEnabled If it is true, then the editor displays the Toggle object inspector button. The value in the config is false. boolean
inStringPlaceholderMode Defines the appearance of in-string placeholders in the Object Inspector. If "Single", all items appear at the top of the item list. In the "Multiple" mode, linked in-string placeholders appear separately and keep the order defined in PSD templates. The value in the config is "Multiple". "Single", "Multiple"
showItemName Enables text labels for design elements. The value in the config is false. boolean
groupRenameEnabled If true, the user can rename group names in the Object Inspector. The value in the config is true. boolean
groupsExpandedByDefault If true, automatically expands groups in the Object Inspector when loading a product. If false, groups of design elements appear collapsed. The value in the config is false. boolean
expandNestedGroups If true, allows the user to expand all nested groups when clicking the parent group in the Object Inspector. If false, the user has to click the groups one by one to expand them all. The value in the config is false. boolean
containerTabsEnabled If true, displays the container tabs. If false, hides the tabs. The value in the config is true. For more details, refer to the Post Press Finishing topic. boolean

Item Menu

Object: widgets.ItemMenu

Name Description Possible values
objectManipulationEnabled Enables commands for deleting and cloning items in a product. The value in the config is true. boolean
verticalAlignmentEnabled Enables commands for the vertical alignment of items to the safe area and group alignment (to select several items, use Ctrl). The value in the config is true. boolean
horizontalAlignmentEnabled Enables commands for the horizontal alignment of items to the safe area and group alignment (to select several items, use Ctrl). The value in the config is true. boolean
changeZOrderEnabled Enables commands for changing the Z-order of items. The value in the config is true. boolean
renameEnabled Enables a command to rename items. The value in the config is false. boolean
groupItemsEnabled If true, enables the Group and Ungroup commands. The value in the config is true. boolean
cloneItemsEnabled Enables a command to clone items on the canvas. The value in the config is true. boolean

Top Toolbar

Object: widgets.TopToolbar

Name Description Possible values
alignButtonsEnabled Displays the vertical aligment buttons. The value in the config is true. boolean
displayAlignButtonsAsDropdown Displays the aligment buttons as a drop-down list. The value in the config is true. boolean
displayCaptionInButtons Displays button captions. The value in the config is false. boolean
historyButtonsEnabled Displays the Undo and Redo buttons. The value in the config is true. boolean
deleteButtonEnabled Displays the Delete button. The value in the config is false. boolean
revertButtonEnabled Displays the Revert button. The value in the config is true. boolean
layoutItemSettingsButtonEnabled Displays the Smart group button to configure the auto-layout settings of grouped design elements. The value in the config is true. boolean
displayZOrderButtonsAsDropdown Displays the drop-down z-order buttons. The value in the config is true. boolean
cloneButtonEnabled Displays the Clone object button. The value in the config is false. boolean
groupButtonEnabled Displays the Group button for selected elements or Ungroup for groups. The value in the config is true. boolean
editTextButtonEnabled Displays the Edit button for text elements. The value in the config is false. boolean
textVAlignmentButtonsEnabled Displays the vertical text alignment buttons. The value in the config is true. boolean
textAlignmentButtonsEnabled Displays the text alignment buttons. The value in the config is true. boolean
textAllowChangeColumnCount Displays the Columns box for rich formatted text. The value in the config is true. boolean
textEmphasisButtonsEnabled Displays the faux text style buttons (bold, italic, and underlined). The value in the config is true. boolean
textFontFamilyButtonEnabled Displays the font list. The value in the config is true boolean
textFontStyleButtonEnabled Displays the font style button. The value in the config is true. boolean
textFontSizeButtonEnabled Displays the font size spin box. The value in the config is true. boolean
textFontColorButtonEnabled Displays the text color picker. The value in the config is true. boolean
textListButtonsEnabled Displays a group of buttons to create and manipulate lists. The value in the config is true. boolean
textParagraphButtonEnabled Displays the Paragraph button to configure paragraph indents. The value in the config is true. boolean
textBendButtonEnabled Displays the Bend button to configure arched text. The value in the config is true. boolean
textShadowButtonEnabled Displays the Shadow button. The value in the config is true. boolean
textStrokeButtonEnabled Displays the Stroke button. The value in the config is true. boolean
textStrokeColorButtonEnabled Displays the Stroke color button. If true, the user can change the stroke color. If false, the color is maintained the same as the text color. The value in the config is true. boolean
closeFontMenuOnClickEnabled If true, the Select font drop-down list closes after a user selects a font. Otherwise, it closes only when a user clicks anywhere outside the list. The value in the config is true. boolean
opacitySliderEnabled Provides the ability to change layer opacity via the Opacity slider in the Top Toolbar. The value in the config is true. boolean
textLeadingButtonEnabled Displays the text leading button. The value in the config is true. boolean
textTrackingButtonEnabled Displays the text tracking button. The value in the config is true. boolean
multiRowModeEnabled Displays the Top Toolbar menu in the multi-row mode to fit all buttons to the screen. The value in the config is false. boolean
borderColorButtonEnabled Displays the Border color button. The value in the config is true. boolean
borderWidthButtonEnabled Displays the Border width button. The value in the config is true. boolean
overlayColorButtonEnabled Displays the Color overlay button. The value in the config is false. boolean
imageEditButtonEnabled Displays the Edit button for images. The value in the config is true. boolean
imageSelectButtonEnabled Displays the Select image button for images. The value in the config is true. boolean
placeholderEditButtonEnabled Displays the Edit button for image placeholders. The value in the config is true. boolean
placeholderSelectButtonEnabled Displays the Select image button for image placeholders. The value in the config is true. boolean
placeholderScaleButtonEnabled Displays the Select placeholder content scale button for image placeholders. The value in the config is true. boolean
placeholderResetContentButtonEnabled Displays the Reset placeholder content button for image placeholders. The value in the config is true. boolean
changeBarcodeTypeButtonEnabled Displays the Change barcode type button. The value in the config is true. boolean
barcodeColorButtonEnabled Displays the Barcode color button. The value in the config is true. boolean
barcodeCaptionButtonEnabled Enables the Code checkbox to display either human-readable information or pure barcodes. The value in the config is false. boolean
placeInSafetyAreaButtonEnabled Displays the Position button to fit the selected design elements to an area bounded by safety lines. The value in the config is true. boolean
fontPreviewSize The font size used to display font names in the Select font list. The value in the config is 17. number
Stroke dialog parameters
object: widgets.TopToolbar.textStroke
color The text stroke color. The default value is "rgb(0,0,0)". color in css-compatible format
size The width of the text stroke, in points. You can also define the max, min, and step values. If not defined, the default values are calculated based on the text font size. number
Shadow dialog parameters
object: widgets.TopToolbar.textShadow
angle The angle of the text shadow, in degrees. You can define the max, min, and step values. number
distance The offsets of the text shadow, in points. You can define the max, min, and step values. The default values are calculated based on the text font size. number
size The size of the shadow blur, in pixels. You can define the max, min, and step values. The default values are calculated based on the text font size. number
Font size box parameters
object: widgets.TopToolbar.fontSize
max The maximum font size. The value in the config is 100. number
min The minimum font size. The value in the config is 4. number
step The step for changing a font size when using the spin box. The value in the config is 0.5. number
Z-order control parameters
object: widgets.TopToolbar.zOrder
zOrderLevelButtonsEnabled Enables the Level up and Level down buttons. The value in the config is true. boolean
zOrderSendToButtonsEnabled Enables the Send to front and Send to bottom buttons. The value in the config is true. boolean

Bottom Toolbar

Object: widgets.BottomToolbar

Name Description Possible values
safetyLinesCheckboxEnabled Displays the Safety lines command on the Marking menu. The value in the config is true. boolean
gridCheckboxEnabled Displays the Grid command on the Marking menu. The value in the config is true. boolean
previewModeCheckboxEnabled Displays the Preview mode command on the Marking menu. In the Preview mode, the Design Editor hides safety lines and the bleed and slug areas on the canvas. The value in the config is true. boolean
snapLinesItemsCheckboxEnabled Displays the Snap to items command on the Marking menu. The value in the config is true. This parameter also supports an ICheckboxConfig object. boolean
snapLinesPrintAreaCheckboxEnabled Displays the Snap to page command on the Marking menu. The value in the config is true. This parameter also supports an ICheckboxConfig object. boolean
snapLinesSafetyLinesCheckboxEnabled Displays the Snap to safety lines command on the Marking menu. The value in the config is true. This parameter also supports an ICheckboxConfig object. boolean
zoomValueEnabled Enables a button displaying the current zoom level. When your users click this button, they can set a predefined zoom level or zoom the canvas to fit safety lines. The value in the config is true. boolean
zoomButtonsEnabled Displays the Zoom in and Zoom out buttons. The value in the config is true. boolean
rotateButtonEnabled Displays the Rotate button allowing your users to rotate the canvas at the specified angle when editing their products. The value in the config is true. boolean
fullWindowButtonEnabled Displays the Full window button. The value in the config is false. boolean
fullScreenButtonEnabled Displays the Full screen button. The full-screen mode is not supported in Internet Explorer and Safari, so the related button is not displayed in these browsers even if it is enabled. The value in the config is true. boolean
Surface selector
object: widgets.BottomToolbar.surfaceSwitch
enabled Enables the pagination control. The value in the config is true. boolean
showThumbnails Displays page thumbnails. The value in the config is false. boolean
showSurfaceNames Displays page names in the pagination control. If it is true and you name your product surfaces, then these names are shown in the navigation area. Otherwise, surface indexes are shown. The value in the config is true. boolean
scrollPageButtonsEnabled Displays the Next and Previous buttons, which allow for scrolling the page selector. The value in the config is true. boolean
toggleSurfaceButtonsEnabled Displays the Next and Previous buttons, which allow for switching between pages. The value in the config is false. boolean
firstAndLastButtonsEnabled Displays the First and Last buttons for the page navigation. The value in the config is true. boolean
specificForSurfaceCount Defines the pagination control for products consisting of the certain number of pages. You can find an example of using this property in the Multiple Pages topic. object

Qr Code

Object: widgets.QrCodeDialog

Name Description Possible values
defaultType A tab to be displayed when the QR-code dialog opens. The default tab is "QrUrl". "QrVCard", "QrUrl", "QrPhone", "QrData"
tabs Defines which tabs and in what order will be displayed in the QR-code dialog. The value in the config is ["QrVCard", "QrUrl", "QrPhone", "QrData"]. array containing any combination of "QrVCard", "QrUrl", "QrPhone", and "QrData"

Linear Barcode

Object: widgets.LinearBarcodeDialog

Name Description Possible values
defaultType The default type of a barcode, "LinearEan8". "LinearEan8", "LinearEan13", "LinearUpcA", "LinearUpcE", "LinearCode128"
autoChecksum If false, allows you to enter either 7 or 8 digits in EAN-8 barcodes. In the first case, the checksum digit will be calculated automatically. In the latter case, the 8th digit must be the correct checksum. If true, you will only be allowed to enter 7 digits, and the checksum will be calculated automatically. The value in the config is false. boolean

Rich Text Editor

Object: widgets.RichTextDialog

Name Description Possible values
applyToAllTextMode Allows you to apply formatting to a whole text element despite a text selection. The value in the config is false. boolean
bgColor The text background color in the Rich Text dialog. The value in the config is "white". color in css-compatible format
createMultiColumnText Allows for creating multicolumn text. If true, the Columns drop-down list appears in the Top Toolbar for rich formatted text elements. The value in the config is false. boolean
showHint Enables hints in the following drop-down lists: "font", "style", "size", "tracking", "leading", "firstLineIndent", "paddingTop", "paddingBottom", "paddingLeft", "paddingRight". By default, all properties of this object are set to true. object
User input boxes
object: widgets.RichTextDialog.showInput
size Enables user input in the Font size drop-down list. The value in the config is true. boolean
Special characters
object: widgets.RichTextDialog.ckeditorConfig
specialChars An array defining the Special character list. For an example and the default character list, refer to IRichTextDialogConfig. array
Text outline parameters
object: widgets.RichTextDialog.textOutline
enabled Enables text outline. The text is outlined in the Rich Text dialog if the difference between the text color and the background color is below the hue or brightness threshold. The value in the config is false. boolean
hueThreshold The hue threshold. The value in the config is 74. number
brightnessThreshold The brightness threshold. The value in the config is 5. number
color The outline color. The value in the config is "rgba(0, 0, 0, 0.2)". color in css-compatible format
Rich text dialog zoom
object: widgets.RichTextDialog.zoom
enabled Enables the zoom slider in the Rich Text dialog. The value in the config is false. boolean
minZoomPct The least value of the zoom slider, must be less than 100. The value in the config is 10. number
maxZoomPct The most value of the zoom slider, must be more than 100. The value in the config is 500. number
Rich text auto-zoom
object: widgets.RichTextDialog.autoZoom
enabled Enables auto-zoom at opening the Rich Text dialog. The value in the config is false. boolean
minFontSizeThresholdPt The font size threshold in points. If the text font size is less than this threshold, the text is auto-zoomed in. The value in the config is 12. number
maxFontSizeThresholdPt The font size threshold in points. If the text font size is more than this threshold, the text is auto-zoomed out. The value in the config is 36. number

Finish Button

Object: widgets.FinishButton

Name Description Possible values
mode The mode of the Finish design button. "Disabled" hides the button and enables a callback. "Download" is the debug mode that shows the button and disables the callback, but allows you to download the hi-res output. The value in the config is "Disabled". "Download", "Disabled"

Image Editor

Object: widgets.ImageEditorDialog

Name Description Possible values
colorAdjustButtonEnabled Displays the Adjust button in the Image Editor. The value in the config is true. boolean
cropButtonEnabled Displays the Crop button in the Image Editor. The value in the config is true. boolean
backgroundEraseButtonEnabled Displays the Background button in the Image Editor. The value in the config is true. boolean
fullscreenOnTouchDevice If true, the Image Editor opens in the full-screen mode on mobile devices. The value in the config is true. boolean
imageContextMenuEnabled If true, your customers will be allowed to open the context menu by right-clicking on the images they are editing. By default, this value is true. boolean

Color Picker

Object: widgets.ColorPicker

Name Description Possible values
showPaletteOnly If true, shows the predefined palettes and hides the color field in the Color picker. If false, shows both the predefined palettes and the field. The value in the config is false. boolean
sectionCollapseEnabled If true, allows users to collapse the sections of predefined palettes when they click headers of these sections in the Color picker. The value in the config is false. boolean
colorTypeDropdownEnabled Enables the Color type drop-down list, where your users can select between CMYK, RGB, and HEX input formats when defining their colors. The value in the config is true. boolean
eyeDropperEnabled Enables the eyedropeer to select colors on the canvas. The value in the config is true. boolean
defaultColorType The initial color input format of the Color picker. The value in the config is "cmyk". "rgb", "cmyk", "hex"
availableColorTypes Specifies the color input formats that will be available to your users in the Color picker. The value in the config is ["cmyk", "rgb", "hex"]. array
paletteHintsEnabled Displays names of color swatches. You can find an example of defining these names in the Color Picker topic. The value in the config is true. boolean
cmykDecimalsEnabled Displays decimal places for CMYK values. If true, the Color picker displays the first decimal place in the CMYK color fields. Otherwise, CMYK values are displayed as integers. The value in the config is false. boolean
colorSpace Outdated, use defaultColorType instead. When both colorSpace and defaultColorType are defined, then colorSpace will be applied. The color space which the user can select a swatch from. The value in the config is "cmyk". "rgb", "cmyk"
colorSpaceDropdownEnabled Outdated, use colorTypeDropdownEnabled instead. When both colorSpaceDropdownEnabled and colorTypeDropdownEnabled are defined, then colorSpaceDropdownEnabled will be applied. Enables the Color space drop-down list, where your users can select between CMYK and RGB palettes when defining their colors. The value in the config is false. boolean
Sections of color swatches
array: widgets.ColorPicker.sections
type The palette type. "NoColorSection", "RecentSection", "ThemeSection", "PaletteSection"
translationKey The palette name. You can use either a string or an identifier of a string defined in the ~\Configuration\translations.json file. string
viewType The appearance of the palette. The value in the config is "Block". "Block", "Line"
targets An item property that you can specify a color for. The value in the config is ["All"]. array containing any combination of "All", "Background", "Border", "Fill", "Line", "RichText", "Shadow", "Stroke", "Text"
palette The predefined palette displayed in the color picker. The value in the config is [["cmyk(0%,100%,100%,0%,100%)", "cmyk(0%,0%,100%,0%,100%)",...],...] two-dimensional array: array of palettes, where each pallete is an array of colors in css-compatible format
Was this page helpful?
Back to top Copyright © 2001–2024 Aurigma, Inc. All rights reserved.